Penetration of plasma surface modification. I. Cf4 and C2F4 glow discharge plasmas

Plasma treatment of a polymeric surface could involve at least three major mechanisms: (1) direct interaction of reactive species in the low-temperature plasma state with the surface (line of sight irradiation effect), and (2) chemical reactions of plasma-induced reactive species with the surface, and (3) reactions among reactive species and the surface (plasma polymerization). The first and the third effects are considered to be limited to the surfaces which directly contact with plasma (glow). The second effect is not limited to the surfaces that contact with plasma state but can penetrate beyond the plasma zone by diffusion. Using an assembly of fibers, of which only the top layer contacts with plasma (glow), the penetration of chemical changes caused by plasma exposure was investigated. Results indicate that the fluorination effect (incorporation of fluorine-containing moieties on the surface of polymeric substrate) penetrates through a considerable thickness of the assembly of fibers, depending on the porosity (gas permeability) of the system. Chemical reactions of plasma-induced (chemically) reactive but nonpolymerizing species with the substrate fibers seems to predominate. The direct interactions of energetic species, such as ions, electrons, and electronically excited species, with polymeric surfaces seems to play relatively minor roles in the plasma treatment investigated. The major role of plasma, in this case, seems to be creating such chemically reactive species. © 1994 John Wiley & Sons, Inc.     

Difference in Conversions Between Dimethyl Sulfide and Methanethiol in a Cold Plasma Environment

This study compared the conversion of two malodorous substances, dimethyl sulfide (CH₃SCH₃, DMS) and methanethiol (CH₃SH) in a cold plasma reactor. The DMS and CH₃SH were successfully destroyed at room temperature. DMS decomposed less than CH₃SH at the same conditions. In oxygen-free condition, CS₂ and hydrocarbons were the major products, while SO₂ and CO_x were main compounds in oxygen-rich environments. The DMS/Ar plasma yielded more hydrocarbons and less CS₂ than that of CH₃SH/Ar plasma. In the CH₃SH/O₂/Ar plasma, rapid formation of SO and CO resulted in the yields much more amounts of SO₂ and CO₂ than those in the DMS/O₂/Ar plasma; and remained only a trace of total hydrocarbons, CH₂O, CH₃OH, CS₂, and OCS. The major differences between the reaction mechanisms of DMS and CH₃SH were also proposed and discussed.     

Modeling of an inductively coupled plasma at reduced pressures

Plasma sintering experiments in this laboratory at reduced pressures revealed efficient heating of the ceramic sample due to recombination of dissociated and/or ionized species on the surface. For establishing a model for this plasma sintering process, it is necessary to first consider the plasma itself. Therefore, a suitable model for an RF inductively coupled plasma has been developed considering reduced pressures. As the pressure decreases, the electron density also decreases at a fixed electron temperature, causing substantial deviations from chemical equilibrium. Due to the poor collisional coupling between electrons and heavy particles at reduced pressures, large deviations from kinetic equilibrium have also to be expected. The model is based on a rotationally symmetric plasma contained in a quartz tube. The power level ranges from 1.5 to 3 kW and the operating pressure is varied from 1 to 0.01 atm. Both deviations from chemical and kinetic equilibrium are included in this model. Thermodynamic and transport properties for two-temperature plasmas are used for this modeling work. The results indicate that for pressures below 0.1 atm, there is a strong ambipolar flux of charge carriers to the confining walls, leading to significant variations of the temperature across the tube. The electron temperature increases rapidly as the pressure decreases, whereas the heavy-particle temperature decreases.     

EAST新型下偏滤器冷却结构 传热性能数值模拟

为实现EAST装置超400s长脉冲高约束模、10MW加热功率下的稳态运行，需对现有的下碳偏滤器进行升级改造，拟采用钨串结极水冷却系统，热通量控制在水冷钨铜第一壁材料允许的稳态的10MW·m^-2。在对下钨偏滤器的冷却结极传热性能进行数值模拟仿真研究的基础上，研究了多种以钨串单元为基础的冷却结极，提出了一种新型下钨偏滤器水冷结极设计，幵建立了满足传热要求的EAST装置新型下钨偏滤器单元结构模型。     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

Using random forest to classify T-cell epitopes based on amino acid properties and molecular features

T-lymphocyte (T-cell) is a very important component in human immune system. T-cell epitopes can be used for the accurately monitoring the immune responses which activation by major histocompatibility complex (MHC), and rationally designing vaccines. Therefore, accurate prediction of T-cell epitopes is crucial for vaccine development and clinical immunology. In current study, two types peptide features, i.e., amino acid properties and chemical molecular features were used for the T-cell epitopes peptide representation. Based on these features, random forest (RF) algorithm, a powerful machine learning algorithm, was used to classify T-cell epitopes and non-T-cell epitopes. The classification accuracy, sensitivity, specificity, Matthews correlation coefficient (MCC), and area under the curve (AUC) values for proposed method are 97.54%, 97.22%, 97.60%, 0.9193, and 0.9868, respectively. These results indicate that current method based on the combined features and RF is effective for T-cell epitopes prediction.     

缆机起重作业驾驶员的操作行为可靠性研究

缆机是大坝浇筑过程中的主要运输设备之一,缆机驾驶员操作水平直接关系缆机起重作业安全.为有效提高缆机起重作业驾驶员操作行为可靠性,预防起重作业安全事故,针对缆机起重作业周期性多维运动的特点,分解驾驶员操作流程;剖析操作行为失误,建立驾驶员行为模式;从时间角度量化操作流程,计算缆机驾驶员操作行为响应失误概率;构建操作行为可靠性分析模型,定量表达操作行为可靠性,分析人因失误对缆机起重作业安全事故的影响.结果表明,吊具与吊罐对接、混凝土卸料等作业过程的缆机驾驶员操作行为可靠性低,需加强安全培训,严格考核制度,从根本上提高缆机驾驶员操作行为的可靠性,以期提升缆机生产效率,实现预防安全事故的目标.     

Influence of oxygen flow rate on the surface chemistry and morphology of radio frequency (RF) magnetron sputtered zinc oxide thin films

Zinc oxide thin films were deposited, by radio frequency magnetron sputtering, on heated and unheated substrates. The oxygen flow rate was varied during deposition, and its effects on the structural and chemical properties of the films were investigated. The films had oriented c‐axis growth with nano‐crystallite size. Their surfaces manifested columnar microstructure, with a surface roughness that was suppressed by the introduction of oxygen. Chemical analysis showed that deposition under an oxygen atmosphere resulted in substantial reduction of oxygen vacancies, with a corresponding incorporation of chemisorbed species. Copyright © 2013 John Wiley & Sons, Ltd.     

基于嵌入式的工业控制人机界面系统研究

针对工业控制系统网络化和良好人机交互性的需求,构建和开发了基于ARM9微处理器的通用工业控制人机界面系统。硬件部分主要讨论了以S3C2440微处理器为核心的硬件电路设计,外围电路模块包括SDRAM及Flash存储器电路、以太网电路、RS-232/RS-422电路、触摸屏及LCD接口等电路,在分析了硬件系统信号完整性的前提下,完成了6层PCB的设计工作。软件部分主要研究了U-Boot移植和内核裁剪技术,编写了相关的硬件设备驱动程序,设计了基于QT/Embedded的人机界面和相关应用程序。论文研究最终实现了工业控制系统的人机交互和控制需求。     

An optimization method for designing SENSE imaging RF coil arrays

An optimization method in RF coil array design for SENSE imaging is described. Using this method the optimized RF coil geometries can be calculated numerically given the required SENSE imaging performance. Although this method can be applied to optimize the RF coil arrays for both 1D and 2D SENSE imaging, to demonstrate the potential applications of this method, we designed RF coil arrays for 2D SENSE imaging and compared their performance by simulation. An optimized 4-channel receive-only RF coil array designed for 2D SENSE imaging was implemented and tested to demonstrate the feasibility of the proposed technique. Imaging results showed reasonable agreement with the simulations, thus the method can be applied to RF coil array designs for SENSE imaging when optimum imaging performance is desired.